Blue point Microscan III Bedienungsanleitung PDF herunterladen (Seite 52)

Operations Main Menu

Selecting an option from the menu opens a list of saved files. Tap an item on the list to open it. Up

and Down arrow buttons appear if there are files listed above or below the current screen. Each

arrow press advances the display one screen.

Use the Delete All button at the bottom of the toolbar to erase all of the files in the folder. To

prevent accidental data loss, a confirmation screen displays when Delete All is selected.

Touch Screen Calibration

Calibrating the touch screen maintains the accuracy of the touch-sensitive display screen.

Perform the following procedure when the touch screen seems out of calibration to keep your scan

tool in good working order.

z To calibrate the touch screen:

1. Select Tools from the Main menu.

2. Select Touch Screen Calibration from the Tools menu.

The first of four calibration screens opens.

Figure 6-19

Sample touch screen calibration screen

3. Tap the center of the indicated area.

The calibration target moves to a new location.

4. Repeat Step 3 for all four touch points.

A “calibration successful” message briefly displays, then the screen returns to the Tools menu.

6.1.9 Stopping Vehicle Communication

Disconnecting the scan tool from the data link connector (DLC) while it is actively communicating

with the vehicle may cause electronic control module (ECM) damage on some models. Always

follow the procedure below while viewing live data to end the diagnostic session before separating

the data cable from the DLC.

z To stop communications with the vehicle:

1. Press the Return button as often as needed to get to the Main Menu.

A “stopping communications” message briefly appears on the screen before the main menu

opens to indicate the scan tool is no longer actively linked to the ECM.

2. Disconnect the data cable from the vehicle DLC.

Touch Screen Calibration

(1/4 step)

Please Click the Point

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 71 72

Keine Kommentare

Blue point Microscan III Bedienungsanleitung Seite 52